When surface disruption is acceptable, a DrillTek trenching contractor in Louisville, KY gets utilities in the ground the fast, economical way, with full visual access to the install and a safe, well-managed trench.
Trenching is open-cut excavation, we dig a trench along the utility route, set the pipe or conduit, and backfill. It's the oldest method in the book, and in the right conditions it's still the most economical way to get a line in the ground.
When the ground is open and the surface can be disturbed, trenching is hard to beat. You get direct visual access to the install, easy inspection, and the ability to lay several lines in the same run.
We handle the full trench, from the cut and the shoring to the backfill and the spoil, so the job goes in safely and to spec.
We mark existing utilities and stake the trench line so the cut follows the design and clears what's already buried.
We open the trench to the depth and width the spec calls for, shoring the walls where depth or soil demands it.
Pipe, conduit, or multiple lines are placed, bedded, and inspected with full visual access before anything is covered.
We backfill in lifts, compact to spec, manage the spoil, and restore the surface behind us.
Trenching wins when the ground is open and cutting the surface is no obstacle. Not sure it fits your job? Call us, we'll tell you straight.
Raw sites with no pavement or landscape to protect are ideal for an economical open cut.
Lay several lines in a single trench, efficient and easy to inspect before backfill.
When a line can drop straight into an open trench, we dig, lay, and backfill. It's faster and more cost-effective than a bore when the ground is open.
When you need eyes on the install and the bedding before anything gets covered.
In open ground, an open cut is often the quickest and least expensive way to install.
See the bedding and the install directly, and catch issues before the trench is closed.
Run several utilities in one trench, with proper separation, in a single pass.
| Water & sewer | Service lines and mains in open ground |
| Storm drainage | Storm lines and site drainage |
| Electric & conduit | Power and site distribution conduit |
| Multi-utility runs | Several lines in one trench, per separation |
| Depths per spec | Shored and backfilled to project requirements |
Send us the run, the depth, and the site conditions. We'll tell you whether trenching is the right call and get you a quote, usually same day.