Directional
Boring

Horizontal directional drilling (HDD) installs pipe and conduit underground along a steered path, under roads, rivers, and structures, without tearing up the surface above.

HDDFiber & ConduitWater & Gas LineRoad CrossingsRiver CrossingsMinimal Surface DisruptionLouisville, KY HDDFiber & ConduitWater & Gas LineRoad CrossingsRiver CrossingsMinimal Surface DisruptionLouisville, KY

Steered
Precision

Directional boring, also called horizontal directional drilling, or HDD, is a trenchless method for installing underground utilities. Instead of digging an open trench the full length of the run, we drill a small pilot bore along a designed path, then pull the pipe or conduit back through it.

A rig launches the drill head at a shallow angle, and an operator steers it underground using a locating system that tracks depth and position in real time. Once the pilot bore reaches the exit point, we ream it to the finished diameter and pull the product line into place.

The result: your utility goes in under the obstacle, a road, a driveway, a creek, a parking lot, with two small work pits instead of a long open cut.

Directional drilling rig set up on a job

Four Steps, Underground

1

Locate & Plan

We locate existing utilities and design a bore path that clears them with safe separation. Nothing turns until the route is confirmed.

2

Pilot Bore

The steered drill head follows the designed path, tracked in real time for depth and alignment from entry pit to exit pit.

3

Ream

We enlarge the pilot bore to the diameter your product line needs, conditioning the hole for a clean pullback.

4

Pullback

The pipe or conduit is pulled back through the reamed bore in one continuous run, installed, backfilled, and restored.

The Right
Method?

Directional boring shines when open-cut trenching would be disruptive, costly, or simply not allowed. Not sure it fits your job? Call us, we'll tell you straight.

✓

Crossing a Road or Driveway

Avoid cutting and repaving pavement, bore underneath and keep the surface intact.

✓

Under a Creek, River, or Wetland

Install below waterways without disturbing the banks or the flow.

✓

Landscaped or Finished Ground

Protect lawns, hardscape, and mature trees, no long trench scar to restore.

✓

Congested Utility Corridors

Thread new lines past existing utilities with a steered, tracked bore path.

Key Benefits

→

Minimal Surface Disruption

Two small pits instead of a full-length trench, less restoration, less downtime.

→

Faster on Crossings

A road or creek crossing that would take days to trench and restore can go in far quicker.

→

Lower Total Cost

Less pavement repair, landscaping, and traffic control adds up to real savings.

What We Install

Fiber & telecom conduitUrban and rural fiber runs, HDPE conduit
Water & sewerService lines and mains under crossings
Gas linesDistribution and service, per code
Electric & primaryConduit for power and site distribution
Typical bore lengthsShort service crossings up to long corridor runs
On the Job

Bore Path Gallery

Rig on Site, DrillTek
HDD Rig
Rig on Site
Louisville, KY
Night Bore, DrillTek
Pullback
Directional Bore
Louisville, KY
Downtown Fiber, DrillTek
Bore Path
Downtown Fiber
Louisville, KY
Related Services

Round Out the Job

05
Private Locates
Mark underground utilities before the bore begins, the first step on every job we run.
Utility→
02
Hydroexcavation
Safely expose existing utilities at crossings with high-pressure water and vacuum.
Vacuum→
04
Missile Boring
A fast, economical option for short, small-diameter crossings that don't need full HDD.
Pipe→
Let's Get to Work

Need a Bore
Done Right?

Send us the crossing, the run, or the whole scope. We'll tell you whether HDD is the right call and get you a quote, usually same day.

Call Us Now
502-851-5977
Email
Get a Free Quote